TAINT TABOR MIXED OLD ALLOY SHEET scraps ALUMINUM, consist of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items.
Typical step of aluminum scraps upgrading in shredded Taint tabor TT scraps processing plant
1. primary removal of ferrous metals using overband magnets or pulley magnetic drum .
2. non-ferrous metals recovery by Eddy Current Separator (ECS)
3. XRT sorter for further separate and upgrade the non-ferrous heavy metals for Zorba and mixed aluminum-containing scraps that processed by eddy current separator , make non-ferrous mixture into pure metal types such as copper, zinc, brass or stainless steel. to ensure recovery and quality improvement of non-ferrous metals for further processing and secondary smelting .
4.weakly magnetic fragmented or shredded stainless steel separation by ultra-high strength magnetic or Induction Sensor Sorter
The shredding of metal scrap represents the first step in the recycling cycle, regardless of whether the metal scrap comes from the metalworking industry, car bodiesautomotive industry , major household appliances , electrical industry or waste industry.
Typical applications include Waste Electrical & Electronic Equipment &and Appliances Recycling , punching waste, beverage cans, shreds alumium sheet , profile and can bundles , car body parts, sheet metal waste and aluminum scrap of all kinds.
2.Air classification machine :
in a shredder system commonly designed for vehicles, the shredded material is subjected to air separation before the separation of steel and iron material. This creates a light fraction capable of flight, known as the shredder light fraction (SLF). The heavy items from the air separation is - after separation of iron - the shredder heavy fraction (SHF). Air classifiers are commonly employed in industrial processes where a large volume of mixed materials with differing physical characteristics need to be separated quickly and efficiently.
or rotary screen, is a kind of mechanical screening machine which is widely used in the separation operation. It controls the material separation by the particle size, and the separation precision is high. The cylinder of the trommel screen is generally divided into several sections, depending on the specific situation. The mesh holes are arranged from small to large, and the mesh hole diameter on each section is the same.
The grain size of material has a huge impact on sorting performance. Too small grain size will cause the metal to be undetected, and too large grain size will inflfluence the sorting effificiency due to mechanical limitations.:
4.valuable Metal recycling process
1. Ferromagnetic Sorting : removing ferrous metals(iron/steel) from shredder residue such as , the model selection depends on the ferrous content and type .it is may a powerful Electromagnetic Drum suspension overband magnetic separator , drum magnetic pulley or just a magnetic plate can fulfil the task for Magnetic metal recovery
|Overband Magnetic Separator
2.non-ferrous scrap recovery from crushed materials ,Eddy Current separator to repel alloys of copper and aluminium non-ferrous metals(such as aluminum, die-cast metal, copper,zinc and other value metals)from incoming materials get the high levels of purity and highest value product.
This rugged, effective and reliable copper & aluminium eddy curent sorting equipment are increasingly used wherever separation of non-ferrous metals from a product stream(such as plastics, glass, electronic scrap, automobile shredder residue, bottom ash, foundry sand, trash, co-mingle recyclables etc). can give a more valuable product, whether the end use is in recycling, waste reduction, raw material production or any other process whereby separation is beneficial.
|Eccentric pole Eddy current Separator
||Concentric Pole Eddy Current Separator
||Ultra High Frequency fines UHF Eddy Current Separator for fine size aluminum recovery
3.Induction Sensor sorter normally being installed after eddy current in order to recover rest of metal after eddy current sorting such as copper, brass, zinc, aluminum and those could not be sorted by eddy current as stainless steel and insolation wire etc.The input capacity is decided by how much metal content in the input material. The input capacity will drop signifificantly if the percentage of metal content goes too high. Notice that the input capacity must be lower while the metal content goes higher. A reasonable range of metal content is 5 to 20% for "All-Metal" sorting, and 45 to 85% for stainles steel sorting.
or the Ultra Magnetic Intensity Roller Magnet are also could for ferrous fines and stainless steel recovery rate
About Fushun Ejet (JSYY)
This was in 2004, when our founder, Bingxun Wang, first used the magnetism knowledge to make research and designed the first set eccentric pole eddy current separator in China. Thus we are fully aware of this responsibility in sorting resources field for nonferrous metal.
In the year 2006, with 25 years magnetic experience Ejet Magnet Established, Keeping improvement for all kinds of magnetic separators, to provide high quality and high performance products is our own responsibility, moreover, to offer the best solution and the most effective service is one of higher-standard targets we are pursuing. Ejet has strict quality control system for raw materials inspection, producing quality inspection and machine testing.
With 4 members team in the beginning, Ejet has grown through continuous product innovation and worldwide expansion to over a 5000 square feet of manufacturing space and more than 100 employees.
The main products eddy current separator , magnetic separator, induction sorters and AI technology machine for recycling industries had been export to more than 50 countries.
Materials testing and machines OEM could be available for better solutions of metal recycling, plastic, glass cullet, construction waste, incineration bottom ash, Aluminum, E waste recycling. Also for food, chemical, lithium batteryindustries.
Ejet after sales service promise that within 15miniutes we will make response to customer's consolations. On condition that some problems cannot be solved by calls or call videos, engineers are available to serve overseas.
Other Working Site ----Metal Solution in Recycling
Besides Recycling , Which aluminium profils, Taint tamor (mix aluminum, sheets, tubes , profiles, ect) , aluminium UBC, Aluminium tense, Brass scrap ALLOYS NONFERROUS PROCESSindustrial branches can the Magnetic Eddy Current Separator be use for?
- Recovery of iron and steel scrap using shredder systems for shredded mixture scraps
- separation and sorting for every task in Auto shredder residue: ASR
- Recovery of non-ferrous metals for recycling & secondary smelting
- Effective recovery & quality improvement of aluminium scrap
- Cable recycling: Optical sorting technology for recycling cables
- Separation & sorting through all fractions in electrical scrap">
- Automatic sorting valuable residues recover valuable materials from household and commecial waste ,also for Separation and sorting recycling incineration bottom ash foundry residues
- Sorting & recycling of valuable materials from construction and demolition waste
- Plastic /glass sorting equipment for metal removal recycling
For further communication ,
kindly contact via Mobile / WhatsApp / Wechat / Line: +86 15242300557
Email to :firstname.lastname@example.org